Toa-electronics F-2000B Manuale Utente

OPERATING INSTRUCTIONSSPEAKER SYSTEMSF-2000BF-2000BTF-2000BTWPF-2000WF-2000WTF-2000WTWPThank you for purchasing TOA's Speaker System. Please care

108.4. Ceiling MountingUse the supplied joint bracket and speaker bracket.NoteSpeaker coverage angles can only be adjusted in the vertical direction (

11Step 3. Mount the speaker to the joint bracket by inserting the speaker bracket into the joint bracket andloosely securing the fixing bolt for tempo

128.5. Speaker Stand MountingThe speaker can be mounted on the optional ST-16A Speaker Stand using the supplied joint bracket andspeaker bracket.Max.1

138.6. Pole Mounting (F-2000BTWP and F-2000WTWP only)To mount the speaker on a pole with diameter of 9 – 34 cm, use thesupplied wall bracket, joint br

14Step 1. Attach the wall bracket to the SP-131 Pole Mount Bracket.Match the orientation of the arrow label with the horizontal direction (left or rig

159. REDUCING THE SPEAKER COVERAGE ANGLEThe speaker's coverage angle can be reduced to 80º horizontal x 80º vertical from its normal range of 110

16Step 2. Wipe clean the mesh grill and speaker cabinet with a soft cloth dampened in a detergent. NoteDo not use thinner or other volatile liquids to

1711. SPECIFICATIONS11.1. F-2000B and F-2000WF-2000B F-2000WBass-reflex type60 W (continuous pink noise)180 W (continuous program)8 92 dB (1 W, 1 m)

18F-2000BT F-2000WTBass-reflex type60 W170  (60 W), 330  (30 W), 670  (15 W), 3.3 k (3 W)92 dB (1 W, 1 m) at installation in a semianechoic field9

19F-2000BTWP F-2000WTWPBass-reflex type60 W170  (60 W), 330  (30 W), 670  (15 W), 3.3 k (3 W)92 dB (1 W, 1 m) at installation in a semianechoic fi

2TABLE OF CONTENTS1. SAFETY PRECAUTIONS ... 32. GENERAL DESCRIPTION ...

3When Installing the Unit• Install the unit only in a location that canstructurally support the weight of the unit and themounting bracket. Doing othe

42. GENERAL DESCRIPTIONTOA's F-2000 Series Speakers are compact two-way speaker systems designed for high efficiency, widerange, and high power i

55. IMPEDANCE CHANGE (F-2000BT, F-2000BTWP, F-2000WT, and F-2000WTWP only)To change the impedance, use a standard screwdriver to rotate the rotary swi

67. NOTES ON OUTDOOR INSTALLATION (F-2000BTWP and F-2000WTWP only)• Be sure to mount the speaker in a vertical (portrait-style) orientation.• Adjust t

78. INSTALLATION8.1. Using the Supplied BracketsThe speaker system is supplied with the following brackets. Use these brackets properly depending on t

88.3. Wall MountingUse the supplied wall bracket, joint bracket, and speaker bracket to permit adjustment of the horizontal andvertical* speaker cover

9Step 2. Attach the joint bracket to the wall bracket using the supplied screws, adjust the horizontal speakerangle, then tighten the screws. Note: Ma